崗位職責
1) Participates in product design review and DFMEA discussion to ensure the molding and mass production feasibility; provide proposal design for possible improvement based on mold flow analysis;
2) Works with PM to identify mold developing schedules based on the risk assessment of mold development;
3) Cooperate with process and tooling engineer to review cycle time, operators, auto production strategy and review the components design and debug with tooling engineer and outside vender;
4) Prepares CAD mold design models which cover details, layouts and assemblies of new mold design for new and revised molded products;
5) Leads mold design review meeting and mold design detailing on required mold design work; ensures the manufacturing feasibility for each detail of mold;
6) Prepares PAR for mold to assist for outside fabrication and tracks mold fabrication progress;
7) Leads the mold assembly with the support of tooling Engineer and check the mold and inserts;
8) Work with tooling engineer for mold debug (including critical dimensions review, Failure disposition…) until the mold is qualified and transfer to mass production;
9) Takes challenge for the mid-complicated mold design and new technology development;
10) Follows Product Development Procedure and make sure tooling development on right phase;
11) Summarizes and shares Lesson Learn;
12) Performs other related duties as assigned by manager.
任職要求：
1) Strong CAD skills, Master UG/PRoE/Catia
2) Organization skills to anticipate, plan, organize and self-monitor workload;
3) Strong analytical ability to apply logical reasoning, test assumptions, observes results and trouble shooting.
4) Strong communication, coordination and team-work ability
5) Be familiar with inspection skill
6) Be familiar with molding process
7) Know the character of common engineering resin (such as HDPE, LDPE, POM, PPS, PBT, PC…)
8) Know mold fabrication method and process
9) University of technology completion in mechanic major /material forming and control engineering/ polymer material and engineering ;
10) GD&T, Engineering Graphics or equivalent CAD training.
11) At least 3 years experience in mold design

TI 汽車集團(中文譯名：迪安汽車部件（天津）有限公司)總部位于英國，是國際上居領先地位的汽車燃油儲存和輸送系統供應商，生產各類流體輸送管路系統、電子油泵、燃油箱、空調管路系統產品。TI汽車集團在全球六大洲擁有130多家企業，為超過23000名員工提供有價值的發展機會。TI集團在中國的第一家子公司成立于1987年，目前已在中國建立了十幾家獨資公司。我們對中國市場的承諾從未改變，而近幾年中國市場正經歷著日益迅猛的發展。 作為一家擁有百年歷史的跨國公司，TI對中國市場抱有堅定的信心，對于在華的未來發展擁有清晰的愿景。
TI汽車天津公司自2002年在泰達建成投產以來，與一汽豐田、一汽大眾、北京奔馳、福建戴姆勒、東風標致、東風日產、長城汽車等整車廠商建立了良好的合作關系，生產規模、銷售額及員工數量逐年增長。隨著中國汽車工業的發展和TI天津員工專業能力的提高，TI天津油箱系統逐漸成為亞太區業務中心并發展了自己的研發能力，建立了體現TI專業技術能力的實驗室。未來的成功已在預期。
期待你的加入，和我們一起與中國汽車行業共同發展。歡迎訪問公司網站：//www.tiautomotive.com